![aeon labs z-stick ii aeon labs z-stick ii](https://data2.manualslib.com/first-image/i27/134/13320/1331923/aeon-labs-z-stick-series-2.jpg)
- #Aeon labs z stick ii install#
- #Aeon labs z stick ii serial#
- #Aeon labs z stick ii update#
- #Aeon labs z stick ii software#
- #Aeon labs z stick ii windows#
So if you switch USB ports, that will be why your HA software can’t find the Z-Wave dongle any more.
#Aeon labs z stick ii windows#
The COM port number Windows assigns depends on the USB port you lug the Z-Stick into. Windows recognized the Z-Stick immediately and assigned the COM-3 port to it. I then plugged in the Z-Stick into a USB3.0 Hub.
![aeon labs z-stick ii aeon labs z-stick ii](https://shop.swiss-domotique.ch/1397-large_default/aeon-labs-z-wave-plus-usb-controller-z-stick-zw090c-gen5.jpg)
So after installing HS3, I activated the official Z-Wave plugin.
#Aeon labs z stick ii install#
This meant a fresh install of HomeSeer HS3 – what better time to test a new Z-Wave USB stick! Setting up the Z-Stick with HomeSeer HS3Īs I have just moved home, I wanted to set up my home automation system again from scratch. In the following setup process, I had the Z-Stick plugged into my HA laptop running HomeSeer HS3 all the time i.e.
#Aeon labs z stick ii serial#
The Z-Stick works in 3 different modes: Inclusion-Mode (standalone), Removal-Mode (standalone) and Serial API Mode (plugged into USB of your HA gateway).
![aeon labs z-stick ii aeon labs z-stick ii](https://www.latelierdugeek.fr/wp-content/uploads/2015/02/zstick_s2.jpg)
The openHAB and Home Assistant community have developed plugins to allow the Z-Stick to work with their software too. Moreover Aeotec has tested and confirmed compatibility of the Z-Stick with HS3, InControl and Indigo7. HomeSeer HS3 natively supports Aeotec Z-Stick and has a specific selection for it in the Z-Wave interfaces list.
#Aeon labs z stick ii update#
One of the reasons you may want to get the Z-Stick is to update the firmware of other devices such as the Aeotec Multisensor 6. This is great for troubleshooting your device and is why it has a battery built-in. The LED colour indicates the communication quality between the Central Controller and the current location of Z-Stick in the network. When the Z-Stick acts an independent/secondary controller that has been unplugged from USB, it can measure the health of your Z-Wave network.In Serial API Mode and acting as a primary controller, it can measure the network health for each device in the network – the colour indicating the signal quality between the Z-Stick Controller and devices in the network.For devices that are far away from your main controller, you can unplug the Z-Stick from USB and take it to the device that you want to include. This is all thanks to the 105mAh built-in rechargeable battery.īeing able to remotely include or remove Z-Wave devices greatly simplifies Z-Wave network installation. This means it can function independent of external power and a host system such as a computer. The Aeotec Z-Stick is a self-powered Z-Wave USB adapter with remote network creation capabilities. The bottom of the Z-Stick has a physical reset button.īack to menu ↑ Software Features Z-Wave features In my experience with HomeSeer HS3, the LED has done only two things though: cycle through red, blue and amber all the time, and turn solid red if a Z-Wave command failed to reach a device. When you remove a device from your Z-Wave network, the LED will blink orange.When you are including a device to your Z-Wave network, it will blink blue fast during discovery and stay solid on successful inclusion.When you press the Action button, the LED blinks blue slowly.According to the manual, the LED behaves differently depending on what you are doing: The Z-Stick Gen 5 differentiates itself visually with the unique LED on its top face which surround the action button. Operating Distance: Up to 492 feet/150 metres outdoors in normal mode, 1310 feet/400 metres outdoors in PA mode.īack to menu ↑ Design and Hardware Features.Max Operating Current: 98mA in PA mode or 40mA in normal mode.Built-in rechargeable lithium battery 3.7V, 105mAh, 15 days backup power.Built-in Z-Wave network diagnostic tool.Over the air firmware updates for Z-Wave devices.Opening the box yields the Z-Stick and a concise quick start guide. The ZW090-A model is designed for countries using the 908.42 MHz Z-Wave frequency such as the USA. This includes Europe and some Asian countries. The rear side lists the specifications and model number of the Z-Stick.Īs you can see, the ZW090-C model above is for countries using the Z-Wave frequency 868.4 MHz. The front of the box highlights the main features such as the built-in diagnostic tool and the multi-coloured signal strength LED. It is no larger than it needs to be and avoids needless plastics and packaging. The Aeotec Z-Stick Gen5 comes in an attractive sleek package. They also have another brand that’s popular in the smart home market – Popp.Īeotec are also an OEM for other brands such as Oomi. But Aeotec no longer belongs to Aeon Labs. Aeotec used to belong to Aeon Labs, the company founded in 2006 and based out of Silicon Valley.